GENIUS TOOLS for Creo: License-dependent functions

GENIUS TOOLS for Creo: License-dependent functions and start switches

The following functions are available with a subscription license for GENIUS TOOLS® Library, GENIUS TOOLS® Parameter and Startup TOOLS.

Extension module (GENIUS TOOLS for Creo)	Description	Release
Load Save Converter	Converts Creo objects from previous Creo-, Wildfire- or Pro/ENGINEER versions to the currently used version.	7.0.0.0
Inspect Revision	Stores all versions of inspection symbols on a drawing. Easily creates an overview of a revision history.	7.0.0.0
Open Base Model	Opens geometric base models that are reference sources for features with one click in the context menu of a feature.	7.0.0.0
Extend Relations	Adds functions to model relations that define parameters for models and – with Creo 7 – for bodies.	7.0.0.0 - 8.0.0.0
Select Surfaces By Color	Surfaces of the same color can be selected with one click and be colored, measured or otherwise modified thereafter.	7.0.1.0
CS Assembler	Automates the assembly of components into an assembly using defined coordinate systems (CS).	7.0.1.0
Extended Dimension Functions	Model dimensions can be increased or decreased very quickly with the mouse in a defined increment in the graphics window.	7.0.2.0
Copy Component Parameter To Substitution Component Parameter	If a value has been assigned to a component parameter for a part in the master representation, this value can be copied to the component parameter for a simplified part.	7.0.2.0
Toggle Symbol Variants	If a grouped symbol has variants in the first level, you can switch between those variants more quickly.	7.0.2.0
Multibody to Assembly	Converts multiple bodies into assemblies (Creo Advanced Assembly Extension (AAX) is required.)	8.0.0.0
Work Dir Manager	Automatically collects all directories used during the work process and enables the current working directory to be changed quickly.	8.0.0.0
Full Backup	Quickly backs up the current model with all dependent data.	8.0.0.0
Command Control	Creo Parametric ribbon commands / commands can be hidden or deactivated.	8.0.1.0
Feature Regeneration Profiler	Regenerates models and displays regeneration times for each feature.	10.0.1.0
Create offset point and offset coordinate systems	Creates a coordinate system at the same location (point, corner point, or coordinate system) within a part or assembly, but with reference to a newly selected reference coordinate system.	12.0.0.0
Stack Note	Imports notes from a multilingual database; the selection of notes is summarized in a note table and can be placed next to a drawing.	12.0.1.0
Split Table	Splits a table so that it is placed to the right or left of it and can be repositioned.	12.0.1.0
Inspect Instance Note	Inspection symbols and notes can be selected to add a note. This shows which inspection symbols belong to the respective pattern.	12.0.1.0

Deactivating functions which require a subscription license

When using a permanent license, users will receive a warning that the functions listed above cannot be opened. You can avoid receiving such a warning by deactivating these functions, i. e. by setting the corresponding configuration option ('start switch') to 0.

Configuration option (Start switch)	Function
gt_start_inspect_revision	Inspect Revision
gt_start_multibody_to_assembly	Multibody To Assembly (Converting multibodies into assemblies)
gtu_start_csassembler	CS Assembler
gtu_start_copyCParamToSubsCParam	Copy Component Parameter To Substitution Component Parameter
gtu_start_extendedDimensionFunctions	Extended Dimensions Function
gtu_start_featureRegenerationProfiler	Feature Regeneration Profiler
gtu_start_fullbackup	Full Backup (Model and data backup)
gtu_start_loadSaveConverter	Load Save Converter
gtu_start_openGeomOrigin	Open base model
gtu_start_relationExtension	Extend relations
gtu_start_selectSurfacesByColor	Select surfaces by color
gtu_start_toggleSymbolGroups	Toggle symbol variants
gtu_start_work_dir_manager	Work Dir Manager (Managing the used working directories)
gtu_start_command_control	Command Control
gtu_start_datum_creation	Create offset point and offset coordinate systems
gtu_start_split_table	Split Table
gtu_start_inspect_instance_note	Inspect Instance Note